The ROCKWOOL LM Klima insulation blanket is composed of strips of rock wool with upright fibers glued to a fiberglass-reinforced aluminum foil. The ROCKWOOL LM Klima lamella blanket is suitable for the external thermal and acoustic insulation of air ducts and guarantees a constant insulation thickness even at sharp corners.
The ROCKWOOL LM Klima EF insulation blanket is constructed from strips of rockwool with upright fibres, bonded to a glass fibre-reinforced aluminium foil. The ROCKWOOL LM Klima EF lamella blanket is suitable for the external thermal and acoustic insulation of air ducts and ensures a consistent insulation thickness even at sharp corners.
PAROC Hvac Section AluCoat T is a concentric, dimensionally accurate rockwool pipe wrap laminated with a mesh-reinforced aluminum foil, self-adhesive overlap, slotted on one side.
Since 30.06.2022, further insulation with the Paroc shell can be carried out without any problems after bulkheading with a shell from most other bulkhead manufacturers; the new test certificate P-3124.165.14-MPA BS makes this possible. Subsequent further insulation with the other manufacturer's products is no longer necessary according to this test certificate.
It is important to note that all penetration seals produced in accordance with Paroc test certificate P-3124.165.14-MPA BS must be marked with the Paroc identification plate.
ORYX BATTS Single are mineral wool batts with a nominal thickness of 50 mm and a density of approx. 150 kg/m³. The batts are provided with a endothermic fire-resistant coating HENSOMASTIK 5 KS on one side
ORYX BATTS Double are mineral wool batts with a nominal thickness of 60 mm and a density of approx. 150 kg/m³. The batts are provided with a endothermic fire-resistant coating HENSOMASTIK 5 KS on both sides
Use ORYX BATTS in combination with HENSOMASTIK 5 KS products
The TECLIT PS 200 is a robust pipe shell with particularly strong aluminum foil for permanent diffusion-tight insulation. The TECLIT PS 200 pipe insulation from ROCKWOOL is suitable for insulating cold pipes in technical installations of buildings. TECLIT PS 200 is a high-quality pipe insulation made of concentrically wound rock wool. The TECLIT PS 200 insulation pipe shell is protected against damage by an aluminum layer with glass fiber reinforcement. The self-adhesive overlap at the longitudinal joint is provided with a particularly strong polycrylate adhesive strip and ensures a long-lasting, diffusion-tight coating.
Conlit 150 U penetration seals were developed in order to make fire resistant pipe penetrations through walls and floors. The sections are suitable for both metal and combustible pipe work. The external diameter of the sections is suitable for the most common diameters used in core drilling.
