WrapTec

All BMI products
  • WrapTec
  • WrapTec
Downloads

TDS

TDS_WrapTec_12_2020_en.pdf

SDS

SDS_WrapTec_12_2020_en.pdf

PDS

PDS_WrapTec_12_2020_en.pdf

Installation manual

manual_WrapTec_ 12_2020_en.pdf
Manufacturer
BMI

WrapTec is a material for sealings in the area of technical insulation. The unique self-welding characteristic allows fast and easy installations at any construction site. The high performance material provides an extreme UV stability and weather resistance in all environments. Due to its absolute water and humidity tight sealing it prevents corrosion under insulation (CUI) at the duct pipe.

  • Acoustic insulation

  • High temperature insulation

  • Passive fire protection

  • Thermal insulation

  • Accessories

Sector
Processing Industry
Properties
Technical Insulation
Covering
PVC
Extra information
  • Material type: High performance polymer (Polyisonbutylene)
  • Colours: anthracite, light-grey
  • Widths: 70 mm, 140 mm, 280 mm, 560 mm
  • Length: 10 m per roll
  • Application temperature: +5 °C up to +40 °C
  • Heat resistance: -40 °C bis +100 °C
  • Fire class: E (B2) (DIN EN ISO 11925 -2/DIN EN ISO 13501- 1/DIN 4102)
  • Connections: By self-welding
  • Weight: ca. 1,85 kg/m²
  • 1,31 kg (per 70 mm roll)
  • 2,63 kg (per 140 mm roll)
  • 5,25 kg (per 280 mm roll)
  • 10,50 kg (per 560 mm roll)
  • Thickness: ca. 1,05 mm
  • Stability (UV): DIN 16726 (DIN EN ISO 20811)
  • Water column: > 20 m (DIN EN ISO 20811)
  • Vapour permeability: Sd > 400m; > 400.000 (DIN EN ISO 1931)
  • Storage: Dry up to +40 °C
Installation guidelines

Protection of the pre-insulated pipes of Domestic Services/ heating and process engineering installations for energy saving.
WrapTec is to be used as a UV- and weather-resistant, self-sealing covering material.
The Pipework/Ductwork insulation has to be covered with WrapTec over it’s entire surface and has to be laid with a minimum of 20mm overlapping. All overlaps of the individual WrapTec sheets are to be undertaken utilising the self-welding properties of the material without the use of additional adhesives in order to prevent moisture from entering and thus ensuring the permanent weather proofing performance of the insulation covering.
All insulated pipes, including Bends and tees and other connections, must be made permanently waterproof. All connections and components protruding from the cladding must be sealed with the WrapTec System M-Glue Adhesive to ensure a permanent, watertight sealing of the system.