Insul-PIR 32 pipe section Alu

All ISOPARTNER products
  • Insul-Phen
  • Insul-PIR
  • Wolstik
  • Insul-Phen 40 elbow
  • Insul-Phen 40 pipe section
  • Insul-PIR 32 elbow
  • Insul-PIR 32 pipe section
  • Wolstik Slangset + Pistool
  • Wolstik Tender
Manufacturer
ISOPARTNER

Insul-PIR 32 pipe section Alu is an insulation shell made of Insul-PIR 32 with a finish of reinforced aluminum foil.
Insul-PIR 32 is a closed-cell polyisocyanurate foam based on a modified taufoam technology with special polyesters. As a result, Insul-PIR 32 meets the required fire classifications as stated in the Building Decree. The insulating gas used fully complies with the latest EU legislation regarding propellants and is completely CFC and HCFC free. Insul-PIR 32 trays can be provided with various foils, including aluminum and mylar.

  • Acoustic insulation

  • High temperature insulation

  • Passive fire protection

  • Thermal insulation

  • Accessories

Sector
HVAC
Processing Industry
Properties
Technical Insulation
Pipe Sections
PUR / PIR
Extra information
  • Density 32 - 35 kg/m3 (EN 1602)
  • Thermal conductivity 0.020 - 0.023 W/m.K (EN 12667)
  • Initial thermal conductivity @10C 23 mW/m.K (EN 13165)
  • Obsolete, diffusion open cladding, d<80mm 29 mW/m.K (EN 13165)
  • Obsolete, diffusion open cladding, 80mm
  • Obsolete, diffusion open cladding, d>120mm 27 mW/m.K (EN13165)
  • Obsolete, diffusion tight 25 mW/m.K (EN 13165)
  • Compressive strength >175 kPa (EN 826)
  • E-modulus compressive strength >4500 kPa (EN 826)
  • CS level according to product standard CS(Y)175 (EN 13165)
  • Tensile strength >175 (EN 1607)
  • E‐modulus tensile strength >5000 kPa (EN 1607)
  • TR level according to product standard TR150 kPa (EN 13165)
  • Flexural strength >200 (EN 12089)
  • E-modulus flexural strength >3500 kPa (EN 12089)
  • Closed cells >90% (ISO 4590)
  • Dimensional stability (EN 1604)
    @70gr C/90%RH, 48h length and width/thickness <1/<1.5 %
    @‐20gr C, 48h‐length and width/thickness <0.5/<0.5 %
    @ deformed (168 h.) compression 40 kPa at 70gr C <1.5 %
  • DS level according to product standard DS(70,90)3, DS (-20-)2, DLT(2)5
  • Fire behavior base material
    European fire class E (EN 13501‐1)
    German building material class B2 (EN 4102-1)
  • Water absorption <2 %vol (EN 12087)
  • Coefficient of Linear Expansion 50-70.10-6 m/m.K.
  • Operating temperature -120/+120 deg C
  • Tolerance thickness T3
Installation guidelines

For insulating pipes and appendages of technical installations in non-residential construction (including air conditioning, central heating and sanitary facilities) and the industrial refrigeration sector. Processing Apply Insul-PIR 32 shells and secure with filament tape. For use as cold insulation, the Insul-PIR 32 shells must be provided with a vapor barrier, e.g. aluminum foil and/or mylar. When used as cold insulation, all ends and longitudinal seams of the Insul PIR 32 shells must be taped using aluminum tape. For extensive processing advice, we refer to the ISSO manual publication 64 ”Insulation quality requirements” When used below -40 °C, it is recommended to use Insul-PIR 40.